Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/09/08 17:15
From version 1.3
edited by Riley Haynes
on 2026/03/02 16:55
Change comment: There is no comment for this version
To version 7.1
edited by Riley Haynes
on 2026/09/08 17:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,8 +4,9 @@
4 4  Layer Height
5 5  Options|=Tolerance
6 6  (Minimum Gap
7 -Recomended)
8 -|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
7 +Recommended)
8 +|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9 +0.16mm
9 9  0.20mm
10 10  0.24mm|± 0.2mm
11 11  
... ... @@ -15,8 +15,9 @@
15 15  Layer Height
16 16  Options|=Tolerance
17 17  (Minimum Gap
18 -Recomended)
19 -|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
19 +Recommended)
20 +|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21 +0.16mm
20 20  0.20mm
21 21  0.24mm|± 0.2mm
22 22  
... ... @@ -26,40 +26,37 @@
26 26  Layer Height
27 27  Options|=Tolerance
28 28  (Minimum Gap
29 -Recomended)
30 -|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.16mm
31 +Recommended)
32 +|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33 +0.16mm
31 31  0.20mm
32 32  0.24mm|± 0.2mm
33 33  
34 -|=Voron 2.4
35 -[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
36 -(LxWxH)|=Nozzle Size|=Standard
37 -Layer Height
38 -Options|=Tolerance
39 -(Minimum Gap
40 -Recomended)
41 -|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|0.18mm
42 -0.24mm
43 -0.30mm
44 -0.36mm
45 -0.42mm|(((
46 -± 0.3mm
47 47  
48 -
38 +
39 +(% class="box" %)
40 +(((
41 +The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
49 49  )))
50 50  
51 -|=Creality K2 Plus (Only Available Upon In-Person/Email Request for Specific Use)
52 -[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
44 +(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
45 +|=(((
46 +Creality K2 Plus
47 +[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
48 +
49 +====== **Multifilament Compatible (Up to 4 Rolls)** ======
50 +)))|=Build Volume
53 53  (LxWxH)|=Nozzle Size|=Standard
54 54  Layer Height
55 55  Options|=Tolerance
56 56  (Minimum Gap
57 -Recomended)
58 -|[[image:voron_2_4.png||width="200"]]|350x350x350mm|0.4mm|0.18mm
55 +Recommended)
56 +|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
57 +0.12mm
58 +0.16mm
59 +0.20mm
59 59  0.24mm
60 -0.30mm
61 -0.36mm
62 -0.42mm|± 0.2mm
61 +0.28mm|± 0.2mm
63 63  
64 64  Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
65 65  
... ... @@ -108,6 +108,6 @@
108 108  
109 109  **Printing with your own filament gives you a 50% discount on credits!**
110 110  
111 -To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
110 +To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
112 112  
113 113  After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].
K2Plus.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.riley_haynes_
Size
... ... @@ -1,0 +1,1 @@
1 +86.6 KB
Content