Changes for page Filament (FDM/FFF)

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4	Layer Height
5	5	Options|=Tolerance
6	6	(Minimum Gap
7		-Recomended)
	7	+Recommended)
8	8	|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9	9	0.16mm
10	10	0.20mm
...	...	@@ -16,7 +16,7 @@
16	16	Layer Height
17	17	Options|=Tolerance
18	18	(Minimum Gap
19		-Recomended)
	19	+Recommended)
20	20	|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21	21	0.16mm
22	22	0.20mm
...	...	@@ -28,43 +28,37 @@
28	28	Layer Height
29	29	Options|=Tolerance
30	30	(Minimum Gap
31		-Recomended)
	31	+Recommended)
32	32	|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33	33	0.16mm
34	34	0.20mm
35	35	0.24mm|± 0.2mm
36	36
37		-|=Voron 2.4 350
38		-[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
39		-(LxWxH)|=Nozzle Size|=Standard
40		-Layer Height
41		-Options|=Tolerance
42		-(Minimum Gap
43		-Recomended)
44		-|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
45		-0.18mm
46		-0.24mm
47		-0.30mm
48	48
49		-0.32mm
50		-0.36mm
51		-0.42mm
52		-)))|(((
53		-± 0.3mm
54	54
55		-
	39	+(% class="box" %)
	40	+(((
	41	+The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
56	56	)))
57	57
58		-|=Creality K2 Plus (Only Available Upon In-Person/Email Request for Specific Use)
59		-[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
	44	+(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
	45	+|=(((
	46	+Creality K2 Plus
	47	+[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
	48	+
	49	+====== **Multifilament Compatible (Up to 4 Rolls)** ======
	50	+)))|=Build Volume
60	60	(LxWxH)|=Nozzle Size|=Standard
61	61	Layer Height
62	62	Options|=Tolerance
63	63	(Minimum Gap
64		-Recomended)
65		-|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.16mm
	55	+Recommended)
	56	+|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
	57	+0.12mm
	58	+0.16mm
66	66	0.20mm
67		-0.24mm|± 0.2mm
	60	+0.24mm
	61	+0.28mm|± 0.2mm
68	68
69	69	Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
70	70
...	...	@@ -113,6 +113,6 @@
113	113
114	114	**Printing with your own filament gives you a 50% discount on credits!**
115	115
116		-To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
	110	+To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
117	117
118	118	After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].