Changes for page Filament (FDM/FFF)

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4	Layer Height
5	5	Options|=Tolerance
6	6	(Minimum Gap
7		-Recomended)
	7	+Recommended)
8	8	|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9	9	0.16mm
10	10	0.20mm
...	...	@@ -16,7 +16,7 @@
16	16	Layer Height
17	17	Options|=Tolerance
18	18	(Minimum Gap
19		-Recomended)
	19	+Recommended)
20	20	|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21	21	0.16mm
22	22	0.20mm
...	...	@@ -28,47 +28,37 @@
28	28	Layer Height
29	29	Options|=Tolerance
30	30	(Minimum Gap
31		-Recomended)
	31	+Recommended)
32	32	|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33	33	0.16mm
34	34	0.20mm
35	35	0.24mm|± 0.2mm
36	36
37		-(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
38		-|=Voron 2.4 350
39		-[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
40		-(LxWxH)|=Nozzle Size|=Standard
41		-Layer Height
42		-Options|=Tolerance
43		-(Minimum Gap
44		-Recomended)
45		-|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
46		-0.18mm
47		-0.24mm
48		-0.30mm
49	49
50		-0.32mm
51		-0.36mm
52		-0.42mm
53		-)))|(((
54		-± 0.3mm
55	55
56		-
	39	+(% class="box" %)
	40	+(((
	41	+The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
57	57	)))
58	58
59	59	(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
60	60	|=(((
61		-Creality K2 Plusdd
62		-[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]
	46	+Creality K2 Plus
	47	+[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
	48	+
	49	+====== **Multifilament Compatible (Up to 4 Rolls)** ======
63	63	)))|=Build Volume
64	64	(LxWxH)|=Nozzle Size|=Standard
65	65	Layer Height
66	66	Options|=Tolerance
67	67	(Minimum Gap
68		-Recomended)
69		-|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.16mm
	55	+Recommended)
	56	+|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
	57	+0.12mm
	58	+0.16mm
70	70	0.20mm
71		-0.24mm|± 0.2mm
	60	+0.24mm
	61	+0.28mm|± 0.2mm
72	72
73	73	Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
74	74
...	...	@@ -117,6 +117,6 @@
117	117
118	118	**Printing with your own filament gives you a 50% discount on credits!**
119	119
120		-To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
	110	+To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
121	121
122	122	After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].