Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/09/08 17:15
From version 2.5
edited by Riley Haynes
on 2026/03/02 17:03
Change comment: There is no comment for this version
To version 9.1
edited by Riley Haynes
on 2026/09/08 17:15
Change comment: Deleted image "voron_2_4.png"

Summary

Details

Page properties
Content
... ... @@ -4,7 +4,7 @@
4 4  Layer Height
5 5  Options|=Tolerance
6 6  (Minimum Gap
7 -Recomended)
7 +Recommended)
8 8  |[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9 9  0.16mm
10 10  0.20mm
... ... @@ -16,7 +16,7 @@
16 16  Layer Height
17 17  Options|=Tolerance
18 18  (Minimum Gap
19 -Recomended)
19 +Recommended)
20 20  |[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21 21  0.16mm
22 22  0.20mm
... ... @@ -28,47 +28,37 @@
28 28  Layer Height
29 29  Options|=Tolerance
30 30  (Minimum Gap
31 -Recomended)
31 +Recommended)
32 32  |[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33 33  0.16mm
34 34  0.20mm
35 35  0.24mm|± 0.2mm
36 36  
37 -(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
38 -|=Voron 2.4 350
39 -[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
40 -(LxWxH)|=Nozzle Size|=Standard
41 -Layer Height
42 -Options|=Tolerance
43 -(Minimum Gap
44 -Recomended)
45 -|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|(((
46 -0.18mm
47 -0.24mm
48 -0.30mm
49 49  
50 -0.32mm
51 -0.36mm
52 -0.42mm
53 -)))|(((
54 -± 0.3mm
55 55  
56 -
39 +(% class="box" %)
40 +(((
41 +The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
57 57  )))
58 58  
59 59  (% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
60 60  |=(((
61 -Creality K2 Plusdd
62 -[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]
46 +Creality K2 Plus
47 +[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
48 +
49 +====== **Multifilament Compatible (Up to 4 Rolls)** ======
63 63  )))|=Build Volume
64 64  (LxWxH)|=Nozzle Size|=Standard
65 65  Layer Height
66 66  Options|=Tolerance
67 67  (Minimum Gap
68 -Recomended)
69 -|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.16mm
55 +Recommended)
56 +|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
57 +0.12mm
58 +0.16mm
70 70  0.20mm
71 -0.24mm|± 0.2mm
60 +0.24mm
61 +0.28mm|± 0.2mm
72 72  
73 73  Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
74 74  
... ... @@ -117,6 +117,6 @@
117 117  
118 118  **Printing with your own filament gives you a 50% discount on credits!**
119 119  
120 -To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
110 +To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will likely be approved. Ask an RPS employee for assistance if you have any other questions.
121 121  
122 122  After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].
voron_2_4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.RPSAdmin
Size
... ... @@ -1,1 +1,0 @@
1 -970.3 KB
Content