Skip to Content

Changes for page Filament (FDM/FFF)

Last modified by Riley Haynes on 2026/09/08 17:15
From version 9.1
edited by Riley Haynes
on 2026/09/08 17:15
Change comment: Deleted image "voron_2_4.png"
To version 1.1
edited by Alex Troyer
on 2026/01/29 02:55
Change comment: Imported from XAR

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.riley_haynes_
1 +XWiki.RPSAdmin
Content
... ... @@ -4,9 +4,8 @@
4 4  Layer Height
5 5  Options|=Tolerance
6 6  (Minimum Gap
7 -Recommended)
8 -|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
9 -0.16mm
7 +Recomended)
8 +|[[image:creality_k1.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
10 10  0.20mm
11 11  0.24mm|± 0.2mm
12 12  
... ... @@ -16,9 +16,8 @@
16 16  Layer Height
17 17  Options|=Tolerance
18 18  (Minimum Gap
19 -Recommended)
20 -|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.12mm
21 -0.16mm
18 +Recomended)
19 +|[[image:creality_k1c.png||width="200"]]|220x220x250mm|0.4mm|0.16mm
22 22  0.20mm
23 23  0.24mm|± 0.2mm
24 24  
... ... @@ -28,39 +28,25 @@
28 28  Layer Height
29 29  Options|=Tolerance
30 30  (Minimum Gap
31 -Recommended)
32 -|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.12mm
33 -0.16mm
29 +Recomended)
30 +|[[image:creality_k1max.png||width="200"]]|300x300x300mm|0.4mm|0.16mm
34 34  0.20mm
35 35  0.24mm|± 0.2mm
36 36  
37 -
38 -
39 -(% class="box" %)
40 -(((
41 -The following printers are only available through explicit **email or in-person correspondence** with RPS staff. This is due to the special features of the printers that can be quite expensive when charging per-hour, so every situation is different. Please email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]] or come in-person to JCAIN 422 to learn more.
42 -)))
43 -
44 -(% cellpadding="0" cellspacing="0" dir="ltr" style="margin-right:auto" %)
45 -|=(((
46 -Creality K2 Plus
47 -[[Specs>>https://www.creality.com/products/creality-k2-plus-cfs-combo]]
48 -
49 -====== **Multifilament Compatible (Up to 4 Rolls)** ======
50 -)))|=Build Volume
34 +|=Voron 2.4
35 +[[Specs>>url:https://all3dp.com/2/voron-2-4-review-3d-printer-specs/]]|=Build Volume
51 51  (LxWxH)|=Nozzle Size|=Standard
52 52  Layer Height
53 53  Options|=Tolerance
54 54  (Minimum Gap
55 -Recommended)
56 -|[[image:K2Plus.jpg||alt="Creality K2 Plus FDM Printer" width="200"]]|350x350x350mm|0.4mm|0.08mm
57 -0.12mm
58 -0.16mm
59 -0.20mm
40 +Recomended)
41 +|[[image:voron_2_4.png||width="200"]]|340x340x280mm|0.6mm|0.18mm
60 60  0.24mm
61 -0.28mm|± 0.2mm
43 +0.30mm
44 +0.36mm
45 +0.42mm|± 0.3mm
62 62  
63 -Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK and Polycarbonate.
47 +Our standard materials available for use in FFF machines are PLA, ASA, TPU, PETG, and in some specialty cases, PEEK.
64 64  
65 65  
66 66  == About Fused Filament Fabrication (FFF) ==
... ... @@ -107,6 +107,6 @@
107 107  
108 108  **Printing with your own filament gives you a 50% discount on credits!**
109 109  
110 -To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are compliant with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material-infused filaments.** As long as the filament is decent quality and not known to damage printers, it will likely be approved. Ask an RPS employee for assistance if you have any other questions.
94 +To print with your own filament, simply make a reservation like normal (which will use the full amount of credits), and come in at your allotted print time. When slicing your print, ensure that your settings are complacent with the current RPS standard, which can be found in the **"Preparing and Slicing Files"** section above. Make sure to confirm with an RPS employee that the filament you are printing with is allowable. **The RPS reserves the right to deny any personal filament from printing on our printers. Certain filaments can damage the equipment, such as CF or other material infused filaments.** As long as the filament is decent quality and not known to damage printers, it will almost certainly be approved. Ask an RPS employee for assistance if you have any other questions.
111 111  
112 112  After you begin your print, notify an RPS employee that you are printing with your own filament, and they will go into the system and manually give you a 50% discount. If you are reserving a time slot and you do not have enough credits to reserve normally but you do with the BYOF discount, email us at [[meen3dprinting@tamu.edu>>mailto:meen3dprinting@tamu.edu]].
K2Plus.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.riley_haynes_
Size
... ... @@ -1,1 +1,0 @@
1 -86.6 KB
Content
voron_2_4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.RPSAdmin
Size
... ... @@ -1,0 +1,1 @@
1 +970.3 KB
Content